Fuse and Switch Panel Assembly
Published on 27 May 2020 19:57
The panel to mount and assemble fuse holders and switches, which is called Battery Panel.

In common word we name this part "Battery Panel".

Battery Panel Assembly part number: WPS-1010 is a complex of fuses and other accessories holders and knife switches.

The layout shown in this essay is according to the client request and is changeable.

The composition of the board that parts are mount on is electric insulation fiber. We do the Megger and Hi-Pot test for each board before subjecting for final assembly.

All copper parts of this assembly are 99.9% pure copper and all parts pass several tests before approving for the final assembly.

All bolts and lock-nuts of this assembly are made of brass alloy and have to pass different tests such as tensile stress, torsion stress, and rupture point test and so on as quality control objects to be installed on panel.

All battery panels made by WPS are presented with the part numbers of EMD and GE shown in parts catalogs.

 

Warranty periods and clauses:

All assemblies and parts have one-year full warranty and World Part Supplier replaces any part that fails due to bad manufacturing. But failures due to improper operation will not considered as warranty obligation. Some cases that we do not accept the warranty claims are:

  1. Any short connection between positive and negative segments of Battery Knife Switch.
  2. Any general and minor defect on brass nuts and bolts such as tightening nut with higher torque than permitted.
  3. Any general and minor defect on fiber panel due to hammering or impact.
  4. Any general and minor defect because of passing over current through part and therefore its melting and deforming.
  5. Any defect on battery shunt due to bad usage.

 

 

List of Parts and Their Part Number on Battery Panel

 

 

Item

WPS P/N:

EMD P/N:

Description

1

WPS-1007

8280185

SWITCH – Knife, Battery D.P.S.T 400A, 250V

2

WPS-1004

8280182

Holder Assembly, Auxiliary Generator, Starting Fuse, 800A, 250V

3

WPS-1002

8280180

Holder Assembly, Generator Field, Cab Heater Fuse, 100A, 250V

4

WPS-1008

8280178

SWITCH – Knife, Ground Relay Cut-Out, S.P.S.T 30A, 125V

5

WPS-1006

8112684

CONTACT – Fuse Test

6

WPS-1009

8172209

SWITCH – Toggle, Fuse Test, S.P.S.T 6A, 125V

7

WPS-1017

8190621

LAMP- Double Contact Base, 30Watts, 75Volts

8

WPS-1018

N/A

Electric Insulation Fiber Panel

9*

WPS-1024

8127050

FUSE – Cab Heater, 70Amps, 250Volts

10*

WPS-1023

8004546

FUSE – Alternator Field, 60Amps, 250Volts

11*

WPS-1019

8118495

SHUNT – Battery Charging Ammeter, 300A, 75MV

 

 

(*): Parts marked by * are not shown in this picture but since they are the major parts of battery panel, we supply them.

 

Here we demonstrate some essential parts of Battery Panel Assembly. You can order them individually by submitting your request for their part number through our website at http://www.WPSupplier.com

 

 
   

 

You may download its catalog from here.

 

Should you have any inquiry, please do not hesitate contacting us through info@WPSupplier.com


SiteLock